Aerofoam F-15 Eagle


    The Aerofoam F-15 Eagle is a simple foam and tape sloper that can take the abuse of rocky sites and combat (or beginner) flying. Quick and easy to build, you'll spend more time flying and less time crying!
    The Aerofoam F-15 Eagle E.P.P. is very rugged and is suited for flying in the most adverse conditions and sites. The F-15 will survive an incredible amount of abuse, and will fly in very light lift. These planes have been built with wingerons, glass bagged, balsa sheeted and even powered by a Royal .46! As a foam and tape glider the F-15 typically weighs 25 to 30oz. with radio. This weight combined with the lifting body effect of the fuselage has created a plane that can be docile enough for a beginner. (I have had 3 min. thermal flights off of a bungee) For more advanced fliers, the F-15 can be loaded with up to 16 oz. of lead for those heavy lift days. If you like flying, but don't like making repairs, your flying sites are less then desirable, or your into "full contact" You should check out the Aerofoam F-15.
    This is a picture that was sent to me by a customer.
Specifications:
Wingspan............................40"
Area:..................................333"

Length:.................................38"

(36"after slamming in a couple of times!)

Weight:....................24 to 48 oz.

Radio:............2 channel standard gear.

Skill level:.........................BEG/ADV

(incredible roll rate with 1-1/2" ailerons!)

Construction:.....Epp Foam, tape, (and some adhesives)
Kit:....pre cut wings, fuselage, nose block, 
tail group, spar and coroplast tail surfaces.
Price: $85.00 shipping included in the Con./U.S.A.


You supply: 

epoxy, shoe goo, contact cement, packing tape or covering of choice, 

strapping tape, 1/2 A control horns and radio gear.


Homepage